Z2
Micro-Drills
We offer 14 standard series for our Z2 micro-drills.
Be aware that we can also design and produce Z2 drills that respond to your specific caracteristics.
Type / D.o.C
Features & Benefits
Helix/
Point angle
Diam range (mm) h5
Flute Length (mm)
Shank size d x OAL (mm)
Hand
Center Drill 120°
2xD
HSS-Co
Can be used as pilot
Can be used for short length 2xD
35°/120°
0.20 to 3.00
0.60 to 5.30
1.50 x 25
2.00 x 25
3.00 x 25
Right
Twist Drill Shank d3.00mm
4-5xD
HSS-Co
Good flexibility of drills, suitable for cam lathes
24°/120°
0.50 to 2.00
2.40 to 10.00
3.00 x 40
Right & Left
Twist Drill Spirex
5xD
HSS-Co
Good flexibility of drills, suitable for cam lathes
24°/120°
0.10 to 3.00
0.70 to 18.00
1.00 x 25
1.50 x 25
2.00 x 35
3.00 x 40
Right & Left
Center / Pilot Drill 120°
2xD
Carbide
Suitable for perparing deep hole drilling
24°/120°
0.20 to 3.00
0.90 to 7.50
1.50 x 30
2.00 x 38
3.00 x 38
Right
Spot Drill 90°
2xD
Carbide
Suitable for preparing hole drilling with chamfer entrance
30°/90°
0.50 to 3.00
2.00 to 9.00
2.00 x 30
3.00 x 38
Right
Spot Mill Drill / MillDrill
2xD
Carbide
Same tool makes pointing, drilling, chamfering, grooving, contouring
30°/90°
0.50 to 4.00
1.00 to 8.00
3.00 x 38
4.00 x 50
5.00 x 50
Right
Micro Drill
4-5xD
Carbide
Perfect surface finish for chip evacuation in high conditions of cutting
35°/120°
0.20 to 3.00
1.10 to 14.00
1.00 x 25
1.50 x 30
2.00 x 38
3.00 x 38
Right
Micro Drill Shank d3.00mm
4-5xD
Carbide
Perfect surface finish for chip evacuation in high conditions of cutting
24°/120°
0.20 to 2.00
1.10 to 12.00
3.00 x 38
Right
Micro Drill
5-7xD
Carbide
Perfect surface finish for chip evacuation in high conditions of cutting
35°/120°
0.10 to 1.99
0.50 to 12.00
1.00 x 25
1.50 x 30
2.00 x 38
Right
Micro Drill Low Helix Left Cut
5-7xD
Carbide
Low helix for high feed rates with better chip evacuation
15°/120°
0.50 to 2.00
4.00 to 12.00
1.50 x 30
2.00 x 38
Left
Straight Shank Drill
10xD
Carbide
Good for drilling with guide ring to avoid deviation
24°/120°
0.50 to 1.50
5.00 to 15.00
Shank size d = D
Right
High Performance Drill
6-7xD
Carbide
Strong core, no deviation, direct drilling, no centering
30°/140°
0.50 to 4.00
3.50 to 28.00
3.00 x 50
4.00 x 60
Right
High Performance Drill
12xD
Carbide
Strong core, no deviation, direct drilling, no centering
30°/140°
0.50 to 3.00
6.00 to 36.00
3.00 x 50
3.00 x 60
3.00 x 90
Right
Flex Type Z2 Drill for Pecking
30-40xD
Carbide
Strong flute length with long back Diam to reach 30-40xD depth hole with pecking cycle process
24°/135°
0.30 to 1.00
3.00 to 10.00
3.00 x 50
3.00 x 77
Right
Type / D.o.C : HSS-Co / 2xD
Features & Benefits : Can be used as pilot and for short length 2xD.
Helix/Point angle : 35° / 120°
Diam Range (mm) h5 : 0.20 to 3.00
Flute Length (mm) : 0.60 to 5.30
Shank Size d x OAL (mm) : 1.50 x 25 / 2.00 x 25 / 3.00 x 25
Hand : Right
Type / D.o.C : HSS-Co / 4-5xD
Features & Benefits : Good flexibility of drills, suitable for cam lathes
Helix/Point angle : 24° / 120°
Diam Range (mm) h5 : 0.50 to 2.00
Flute Length (mm) : 2.40 to 10.00
Shank Size d x OAL (mm) : 3.00 x 40
Hand : Right & Left
Type / D.o.C : HSS-Co / 5xD
Features & Benefits : Good flexibility od rills, suitable for cam lathes
Helix/Point angle : 24° / 120°
Diam Range (mm) h5 : 0.10 to 3.00
Flute Length (mm) : 0.70 to 18.00
Shank Size d x OAL (mm) : 1.00 x 25 / 1.50 x 25 / 2.00 x 35 / 3.00 x 40
Hand : Right & Left
Type / D.o.C : Carbide / 2xD
Features & Benefits : Suitable for preparing deep hole drilling
Helix/Point angle : 24° / 120°
Diam Range (mm) h5 : 0.20 to 3.00
Flute Length (mm) : 0.90 to 7.50
Shank Size d x OAL (mm) : 1.50 x 30 / 2.00 x 38 / 3.00 x 38
Hand : Right
Type / D.o.C : Carbide / 2xD
Features & Benefits : Suitable for preparing hole drilling with chamfer entrance
Helix/Point angle : 30° / 90°
Diam Range (mm) h5 : 0.50 to 3.00
Flute Length (mm) : 2.00 to 9.00
Shank Size d x OAL (mm) : 2.00 x 30 / 3.00 x 38
Hand : Right
Type / D.o.C : Carbide / 2xD
Features & Benefits : Same tool makes pointing, drilling, chamfering, grooving, contouring
Helix/Point angle : 30° / 90°
Diam Range (mm) h5 : 0.50 to 4.00
Flute Length (mm) : 1.00 to 8.00
Shank Size d x OAL (mm) : 3.00 x 38 / 4.00 x 50 / 5.00 x 50
Hand : Right
Type / D.o.C : Carbide / 4-5xD
Features & Benefits : Perfect surface finish for chip evacuation in high conditions of cutting
Helix/Point angle : 35° / 120°
Diam Range (mm) h5 : 0.20 to 3.00
Flute Length (mm) : 1.10 to 14.00
Shank Size d x OAL (mm) : 1.00 x 25 / 1.50 x 30 / 2.00 x 38 / 3.00 x 38
Hand : Right
Type / D.o.C : Carbide / 4-5xD
Features & Benefits : Perfect surface finish for ship evacuation in high conditions of cutting
Helix/Point angle : 24° / 120°
Diam Range (mm) h5 : 0.20 to 2.00
Flute Length (mm) : 1.10 to 12.00
Shank Size d x OAL (mm) : 3.00 x 38
Hand : Right
Type / D.o.C : Carbide / 5-7xD
Features & Benefits : Perfect surface finish for chip evacuation in high conditions of cutting
Helix/Point angle : 35° / 120°
Diam Range (mm) h5 : 0.10 to 1.99
Flute Length (mm) : 0.50 to 12.00
Shank Size d x OAL (mm) : 1.00 x 25 / 1.50 x 30 / 2.00 x 38
Hand : Right
Type / D.o.C : Carbide / 5-7xD
Features & Benefits : Low helix for high feed rates with better chip evacuation
Helix/Point angle : 15° / 120°
Diam Range (mm) h5 : 0.50 to 2.00
Flute Length (mm) : 4.00 to 12.00
Shank Size d x OAL (mm) : 1.50 x 30 / 2.00 x 38
Hand : Left
Type / D.o.C : Carbide / 10xD
Features & Benefits : Good for drilling with guide ring to avoid deviation
Helix/Point angle : 24° / 120°
Diam Range (mm) h5 : 0.50 to 1.50
Flute Length (mm) : 5.00 to 15.00
Shank Size d x OAL (mm) : Shank size d = D
Hand : Right
Type / D.o.C : Carbide / 6-7xD
Features & Benefits : Strong core, no deviation, direct drilling, no centering
Helix/Point angle : 30° / 140°
Diam Range (mm) h5 : 0.50 to 4.00
Flute Length (mm) : 3.50 to 28.00
Shank Size d x OAL (mm) : 3.00 x 50 / 4.00 x 60
Hand : Right
Type / D.o.C : Carbide / 12xD
Features & Benefits : Strong core, no deviation, direct drilling, no centering
Helix/Point angle : 30° / 140°
Diam Range (mm) h5 : 0.50 to 3.00
Flute Length (mm) : 6.00 to 36.00
Shank Size d x OAL (mm) : 3.00 x 50 / 3.00 x 60 / 3.00 x 90
Hand : Right
Type / D.o.C : Carbide / 30-40xD
Features & Benefits : Strong flute length with long back Diam to reach 30-40xD depth hole with pecking cycle process
Helix/Point angle : 24° / 135°
Diam Range (mm) h5 : 0.30 to 1.00
Flute Length (mm) : 3.00 to 10.00
Shank Size d x OAL (mm) : 3.00 x 50 / 3.00 x 77
Hand : Right
Call us
+33 (0)4 50 60 81 03
Write to us
sales@gabrielmauvais-sarl.com
Gabriel Mauvais SARL
387 ROUTE DES GRANDS BOIS 74370 VILLAZ France